Push Rod for TC40 Coupling Master Cylinder
: 2 in stock
: PT1088
Replacement push rod for the hydraulic master cylinder on a Trojan TC40 braked coupling. The push rod connects the master cylinder to the coupling's park brake lever.
| Spec | Value |
|---|---|
| Suits | Trojan TC40 coupling master cylinder |
| Part number | PT1088 (TPT1088) |
Bleeding after fitting: mount the master cylinder to the coupling bracket and connect the push rod to the park brake lever. Fill the reservoir to within 10mm of the top with fresh DOT 3 or DOT 4 brake fluid, leaving the brake line disconnected. Gently work the lever (a partial stroke is usually enough) until fluid comes out of the port, then connect the brake line and bleed the brakes as normal. On four-wheel-braked trailers, bleed the wheels furthest from the master cylinder first. Brake hoses go in the lower caliper ports and bleed screws in the uppermost ports.
Related Products
Not sure this fits? Check before you order
Compare your existing part against the specifications, or send us photos and we'll help identify it.
Helpful to include: photos, measurements and any part numbers stamped on your old part.